TYFOCOR LS – Special heat transfer fluid for thermal solar systems
Product properties
Tyfocor® LS is a clear, red-fluorescent liquid with a faint odour, based on physiologically unobjectionable propylene glycol, and water. It has been designed especially for utilisation fluid in solar heating equipment under elevated thermal conditions (vacuum tube collectors).
The corrosion inhibitors contained in Tyfocor® LS reliably protect the metals normally used in solar installations against corrosion, ageing and deposits over long periods. Tyfocor® LS prevents the surfaces of heat exchangers from becoming fouled, and ensures consistently high thermal efficiency.
In order to maintain its specific properties, Tyfocor® LS must not be mixed with other heat transfer fluids, and must never be diluted by water. If leakages or other losses occur, the heat transfer fluid in the system must be replenished with Tyfocor® LS only!
Special products
- TYFOCOR LS Mediterraneo
((for use in warm areas, provides frost protection down to -12°C) - TYFOCOR LS Artic
(for use in extremely cold areas, provides frost protection down to -47°C)
TYFOCOR® LS is a registered trademark of TYFOROP Chemie GmbH.
Package size:
- 5L* non-returnable PE can
- 10L non-returnable PE can
- 15L* non-returnable PE can
- 20L non-returnable PE can
- 25L* non-returnable PE can
- 30L non-returnable PE can
- 60L non-returnable PE can
- 200L non-returnable PE drum
- 1.000L non-returnable / returnable IBC
- Road tanker 22.000L
* uncommonly used container sizes
Colouring:
- red fluorescent
Delivery form:
- Standard, ready-to-use -28 °C
- Mediterraneo, ready-to-use -12°C
- Arctic, ready-to-use -47°C
